Bulk Aggregates for Patios in Mills, NM

Order gravel and aggregate delivery in Mills, NM, and New Mexico Rock Supply drops it at your site. Shop online, pick your material, and set the quantity by the ton or the yard.

Start with base course. It is the compacted layer that carries a patio, a slab, or a parking pad, and it is what this part of New Mexico calls road base.

Ground and Conditions in Mills

Across the Eastern High Plains and the Llano Estacado, a caliche caprock sits under shallow soil. Water that soaks into the sand above it stops at the caprock and stays near the surface.

A thin base over that ground fails fast. The pad pumps, the pavers rock, and the joints open within a season.

Deep sandy and loamy plains soils over the Ogallala move under a load when they stay wet. Blow sand across the dune country shifts in the dry spring wind.

Wind erosion comes first on the open plains. Storm runoff then cuts the caprock escarpment and the breaks, and playa margins scour after heavy rain.

Low ground ponds after every heavy storm here, because the Llano drains into closed playa basins rather than to rivers. Set your patio grade with that in mind.

Spring through late fall is the main working season. Winter wind and frozen ground stop compaction, and spring is the windiest and dustiest stretch of the year.

Materials for Mills Projects

Bedding under pavers and flatwork is where a patio is won or lost. The bedding layer spreads the load and keeps the surface true, so it has to be the right material at the right grade.

Base course, also called Type I or Type II base course or 3/4 minus, is the compacted structural layer under drives, parking pads, and slab and shed bases.

Washed sand, also called concrete sand, is the bedding and leveling sand under slabs and flatwork. It spreads flat and holds a screed line.

Stone screenings bed pavers and flagstone and fill the joints. New Mexico yards more often reach for crusher fines at this stage, so ask for the one your surface needs.

Crusher fines are screened crushed rock fines that pack to a firm walkable crust. They suit paths, patios, courtyards, and xeriscape walkways, and they come in colors.

Mason sand, also called plaster sand, handles block, brick, and adobe work, stucco and plaster coats, and paver joints. New Mexico yards usually list it as plaster and masonry sand.

Drain rock and #57 Stone handle French drains, dry wells, and foundation drains. Rounded Natural Pea Gravel works for walkways, dog runs, and drainage beds.

Top Soil and Garden Soil cover lawns, tree wells, and raised beds over thin alkaline ground. Fill Dirt raises grade before a base course lift goes down.

Delivery to Mills and the Surrounding Area

Order online and choose your quantity by the ton or by the yard. Each product page has a calculator if you need to size the load.

A dump truck tips the material in one pile at your site. Have the spot clear and reachable before the truck arrives.

Mills sits in Harding County. Delivery covers Roy and Mosquero along with the surrounding area.

Questions About Gravel and Aggregate in Mills

What gravel is best for a driveway in Mills?

Base course is the compacted layer a drive is built on, and it is the right starting point on the sandy plains and caliche ground here. Top it with driveway gravel on a long rural approach, or with 3/4 crushed rock for a firmer wearing surface.

On ground that ponds, put drain rock at the low edge first.

How much material will my project need?

Quantities are ordered by the ton or by the yard. Each product page has a calculator that takes your project numbers and returns the quantity to order.

Have your area and the depth you plan to build to ready before you start.

Size Your Load and Place Your Order

Use the calculator on the product page to size your load, then order base course, washed sand, or crusher fines online. New Mexico Rock Supply delivers bulk aggregate to Mills and Harding County by the ton or the yard.

Place your order and a truck will tip it at your site.